Mould & Plate Coatings

发布时间:2014-07-23 01:59    作者:     点击:600次

Copper has lower hardness which leads to lower anti-abrasive property. Therefore, the area at the lower part of the moulds, where the stress increases drastically due to shells, will be more severely worn. To increase the life time of copper moulds, CCM provides uniform mould interior surface plating with suitable hardness. Most of the copper mould tubes for small size billet casting are not used in any casting system where there are rigid casting stream support, therefore they are very sensitive to wearing. We use hard chrome plating which provides life of mould tubes. The llating thickness recommended by CCM will be controllde in the best range. As for the coating of copper mould plates, based on our years of experiece, we are able to provide Chrome coating, Ni-Cr coating, Ni-Fe coating and Ni-Cr coating to meet the demand of various customers both at home and abrod.

Company news

Contact Us

Manufacturing Headquarter
Dong’an Huangli Town Wujin District Changzhou Jiangsu Province China
Tel:(86)0519 83731208 Fax:(86)0519 83731888
Zip:213155
Email:wch@ccmgroup.cn
www.ccmgroup.cn

Corporate Sales
Suite 2306,23F Marina House,No.68 Hing Man Street, Hong Kong,China
Tel: (852) 3955 2272 Fax: (852) 3565 5682
Email: enquiry@ccmoulds.com

Message Board

If you have what it takes to tell us, we will contact you as soon as possible

Changzhou Changhong Mould For CCM Co.,Ltd.
COPYRIGHT 2013 ALL RIGHTS RESERVED
苏ICP备19031746号-1
Technical support:Press
代账软件